OPTICS AN/PEQ2A AND AN/PVS7B 05 JANUARY 2008

OPTICS AN/PEQ2A AND AN/PVS7B 05 JANUARY 2008

CHARACTERISTICS Handheld Illuminator / Pointer Weapon Mounted Accurately Direct fire Illuminate and Designate Targets

DESCRIPTION Class 3B laser Adjustable bezel to vary size of illumination beam Safety block for training

GENERAL CHARACTERISTICS

AN/PEQ-2A MAJOR COMPONENTS

OPERATING INSTRUCTIONS Battery Installation.

MODE SELECTOR SWITCH Six positions.

SAFETY BLOCK Safety Block.

BUTTON SWITCH Pressing the button switch twice in rapid succession will lock the sight in the on position.

FOCUS KNOB Vary the beam spread.

BORESIGHT ADJUSTERS Adjusting the aiming beam and illumination beam in both elevation and azimuth.

MOUTING PROCEDURES Mounting Bracket Assemblies. Equal Space Between the bracket and bracket caps. Failure to fully tighten screws may cause zero retention problems.

SERVICE RIFLE MOUNTING PROCEDURES

M16A2 MOUNTING PROCEDURES

M16A2 MOUNTING PROCEDURES

ZEROING PROCEDURES Zero Preset. The AN/PEQ-2A incorporates a unique zero preset feature which enables the aiming and illumination beams to be nearly zeroed when the AN/PEQ-2A is initially attached to the weapon.

ZEROING ON A 25 METER RANGE This procedure is used to zero the TPIAL to the weapons using live fire. Confirm that equipment is tight prior to zeroing. Each adjuster click moves the strike point one square on the 25 meter zeroing target.

ZEROING USING THE LASER BORESIGHT Boresight targets are included with the laser borelight system.

CHARACTERISTICS OF AN AN/PVS-7 NIGHT VISION GOGGLES Requires some moonlight or starlight to operate.

CHARACTERISTICS OF AN AN/PVS-7 NIGHT VISION GOGGLES Compass Head mount assembly Helmet mount assembly

AN/PVS-7 NIGHT VISION SIGHT CONTROLS

OPERATION OF AN/PVS-7 NIGHT VISION GOGGLES Operation of the AN/PS -7 night vision sight is relatively simple and consists of performing the following performance steps.

DEMONSTRATION

PRACTICAL APPLICATION

SUMMARY