Laboratory Accumulation of Hazardous Waste Presented By: Richard Smith

Laboratory Accumulation of Hazardous Waste Presented By: Richard Smith Environmental Health & Safety Administrative Office Research and Extension Centers

Purpose and Scope of Presentation The purpose of this presentation is to provide information about the regulatory requirements for laboratory accumulation of hazardous waste. The scope of this presentation encompasses laboratory waste accumulation limits, general conditions for laboratory waste accumulation areas, waste container requirements, and waste container labeling.

Introduction Laboratories that generate and accumulate hazardous waste must maintain compliance with the California Health and Safety Code (H & S Code) and California Code of Regulations (CCR). Project leaders or other staff that manage laboratories where hazardous wastes are generated and accumulate are responsible for complying with the relevant portions of the H & S Code and CCR for laboratory accumulation of hazardous waste.

Introduction (continued) If accumulated laboratory hazardous waste is not in compliance with the H & S Code and/or CCR, then a violation may be issued by a regulatory agency during an inspection. Although violations will be issued to the research and extension center, the project leader or laboratory manager will be held responsible for any monetary penalties or other mitigation to correct violations.

Laboratory Hazardous Waste Accumulation Limits A laboratory may accumulate up to 55 gallons of hazardous waste or one quart of acutely hazardous waste (H & S Code, Sect. 25200.3.1 b). Within 3 days after the 55-gallon or onequart accumulation limit is reached, the container must be marked with the date the limit is reached and moved to the “90day” accumulation area (CCR, Title 22, Sect. 66262.34 e 3).

Laboratory Hazardous Waste Accumulation Limits (continued) The total time laboratory hazardous wastes can be accumulated is one year (CCR, Title 22, Sect. 66262.34 e 1 B). The one year total accumulation limit includes both the time spent at the laboratory accumulation area and the “90-day” accumulation area (H & S Code, Sect. 25123.3 e 1). Realistically, laboratory hazardous wastes should accumulate no more that 9 months in the laboratory accumulation area before being transferred to the 90-day accumulation area for disposal.

General Conditions for Laboratory Hazardous Waste Accumulation Hazardous waste must accumulate in an area located as close as is practical to the location where the laboratory hazardous waste is generated (H & S Code Sect. 25200.3.1 b). The laboratory hazardous waste accumulation area must be managed or under the control of personnel who have received training commensurate with their responsibilities and authority for managing laboratory hazardous waste (H & S Code, Sect. 25200.3.1 b 1)

Hazardous Waste Accumulation (continued) Accumulated laboratory hazardous wastes must be managed to ensure incompatible hazardous wastes are not mixed, or are otherwise prevented from coming into contact with each other (H & S Code, Sect. 25200.3.1 b 1). The amount of laboratory hazardous waste accumulated in the accumulation area must be appropriate for the space limitations and the need to safely manage waste containers (H & S Code, Sect. 25200.3.1 b 3).

Requirements for Laboratory Hazardous Waste Containers Containers holding laboratory hazardous waste must be in good condition and not have severe rusting or structural defects (CCR, Title 22, Sect. 66265.171). Containers shall be made of or lined with materials which will not react with, or otherwise be compatible with, the laboratory hazardous waste to be stored (CCR, Title 22, Sect. 66265.172)

Requirements for Laboratory Hazardous Waste Containers (continued) Containers containing laboratory hazardous waste shall always be closed during storage except when it is necessary to add or remove waste (CCR, Title 22, Sect. 66265.173 a) Containers containing laboratory hazardous waste shall not be opened or handled in a manner which may rupture the container or cause it to leak (CCR, Title 22, Sect. 66265.173 b)

Requirements for Laboratory Hazardous Waste Container Labels The initial date that laboratory hazardous waste is placed in containers must be clearly marked and visible on all containers used for storage (CCR, Title 22, Sect. 66262. 34 f 1). Each container used for storage of laboratory hazardous waste shall be marked with the words “Hazardous Waste” (CCR, Title 22, Sect. 66262.34 f 3).

Requirements for Laboratory Hazardous Waste Container Labels (continued) Each laboratory hazardous waste container must be marked with the following information (CCR, Title 22, Sect. 66262.34 f 3 A-C): 1. The composition and physical state of the wastes; 2. A statement that identifies the particular hazardous properties of the waste; and 3. Name and address of the generator (i.e. responsible project leader).

Summary Project leaders or other staff that manage laboratories are responsible for complying with regulatory requirements for laboratory accumulation of hazardous waste. A laboratory may accumulate up to 55 gallons of hazardous waste or one quart of acutely hazardous waste for one year. The hazardous waste accumulation area must be close to where the waste is generated and managed by an appropriately trained person.

Summary (continued) Accumulated laboratory hazardous wastes must be managed to ensure incompatible hazardous wastes are not mixed. Hazardous waste containers must be in good condition and made of materials compatible with the hazardous waste to be stored. Containers shall always be closed except when adding or removing hazardous waste.

Summary (continued) Containers shall be opened or handled in a manner to prevent ruptures or leaks. Containers shall be marked with the initial date hazardous waste accumulation, word “Hazardous Waste,” the composition and physical state of the wastes, a statement that identifies the hazardous properties of the waste, and the name and address of the generator (i.e. responsible project leader).