Institute of Occupational Safety and Health Safety

Institute of Occupational Safety and Health Safety Training Presentations Heavy Equipment Safety Awareness

FY-12 OSHA Susan Harwood Grant Program This material was produced under grant number SH22297-SH1 from OSHA. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

Objectives: Participants will: Recognize potential hazards of various equipment Implement hazard prevention and controls Be familiar with OSHA’s role and standards regarding heavy equipment hazards Prevent other potential hazards

Heavy Equipment Hazards Mobile heavy equipment at construction sites is a major cause of fatalities: Electrocuted if equipment touches an overhead power line Crushed if vehicle overturns Run over by a backing vehicle Crushed if caught between a wall or other vehicle or structure

Hazard Prevention and Controls Pre-Construction work site analysis. Spotters Provided for in-the-blind, backing machines and/or equipment. Perimeter Fencing, Enclosures, signs Temporary Barricades around Hazards.

Hazard Prevention and Controls Pre-Construction site analysis Identify Potential Known Hazards. Employee Training? Job Conditions: Haul Roads, Access Points, Proper light if working at night Location of Storage Areas, office buildings. Tool, Storage and Change Trailers.

Hazard Prevention and Controls Spotters Necessary around vehicles or equipment when: A driver or operator does not have a full view of the intended path of travel Backing with limited visibility or space Backing or maneuvering trailers Maneuvering with limited space

Spotters Hand Signals Straight Back Back Right Back Left STOP

Hazard Prevention and Controls Perimeter Fencing Necessary around vehicles or equipment to safeguard employees

Working Around power lines

Working Near Power Lines A spotter must be present Must have a clear view of the power line and the equipment operator, and be able to immediately inform the operator of any danger. A dedicated power line spotter may be required to watch distance to power lines.

Crane Hand Signals (Spotters)

OSHA Prevention Videos (V-Tool) Struck by accidents – Vehicle Back up

OSHA Prevention Videos (V-Tool) Struck by accidents – Swinging Crane www.osha.gov

Prevention Videos Heavy Equipment and Crane Accidents www.heavyconstructionacademy.com/certficati ons/

Summary Be aware of your surroundings Always use a spotter when backing up Heavy Equipment The use of spotters can save lives Safeguard working area by establishing a safety perimeter

Helpful OSHA Resources OSHA has many helpful programs, including assistance about safety and health programs, state plans, workplace consultations, voluntary protection programs, strategic partnerships, training and education, and more OSHA Heavy Equipment E-Tool: http://www.osha.gov/SLTC/etools/hurricane/heavyequip.html

OSHA Contact Numbers To report Unsafe Working Conditions, Safety and Health Violations Contact OSHA @: 1-800-321-OSHA (6742) / TTY1-877-889-5627 To File a Complaint Form: To file an OSHA-7 report online, see how to file a complaint with OSHA (www.osha.gov) For more information regarding your rights, see Worker Rights

References 29 CFR 1926 Subpart O, Motor vehicles, mechanized equipment, and marine operations. OSHA. 29 CFR 1926.251, Rigging equipment for material handling. OSHA Standard. 29 CFR 1910.178, Powered industrial trucks. OSHA Standard. 29 CFR 1926, 29 CFR 1926.61 Retention of DOT Markings